CMOS Integrated Circuits–II Circuit Design Project

Just captions/titles/figures/tables… no writing in this project submission (see project example).

Design a fully differential operational amplifier meeting the following specifications. And also complete the IC layout of the opamp that passes DRC and LVS. Everything is to be done in the Cadence environment using the TSMC 0.18um setup. Use an ideal power supply (1.8±0.1V), an ideal common-mode voltage reference of your choosing (fixed for all cases), and an ideal reference current source to ground (fixed for all cases). If you use resistors, the nominal value must be less than or equal to 25kW. Finally, you are not allowed to use RHP zero cancellation in this project. Simulations are to be completed for three process corners: TT (with temp=27ºC & VDD=1.8V), SS (with temp=85ºC & VDD=1.7V), and FF (with temp=-40ºC & VDD=1.9V).

Specifications (for all three cases): Power supply VDD=1.8V, 1.7V, 1.9V (TT, SS, FF) Load at each output Cload=3pF (to be affected by TT, SS, FF) Loop gain > 70 dB Loop UGBW > 70 MHz Loop Phase Margin > 60° CMFB Phase Margin > 60° CM accuracy (with no differential signal) < ±0.05V Output swing (6dB/50% compression) > 1V peak-to-peak differential Power consumption (including bias) < 9 mW Differential Loop characteristics are to be obtained with 1pF input and feedback capacitors (fixed 1pF value for all cases). Use 1GW resistors as needed for simulation purposes. Eliminate the 1pF input/feedback capacitors when doing CMFB evaluation. About a 2/3 of your project grade will depend on this design and simulation portion. The second part of the project is IC layout. Grading depends on whether you pass LVS and DRC, and the quality of your layout (ask yourself if the layout “looks” good). About a 1/3 of project grading will depend on this layout portion.

#CMOS #Integrated #CircuitsII #Circuit #Design #Project

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

MAIN OBJECTIVE OF TERM PAPER 1) Explore in-depth your interest in Gerontology; 2) Demonstrate expertise in that specific area in Gerontology. Ask a

MAIN OBJECTIVE OF TERM PAPER 1) Explore in-depth your interest in Gerontology; 2) Demonstrate expertise in that specific area in Gerontology. Ask a question that pertains to Gerontology, then provide “an answer” using empirical results from professional publications. Peer-reviewed literature from other scientific domains may be used (e.g., developmental psychology,

Final Essay: Traditional Approach Directions & Requirements: Write a 6 page double spaced (1,500+ word) analysis essay on the following topic below. I

Final Essay: Traditional Approach Directions & Requirements: Write a 6 page double spaced (1,500+ word) analysis essay on the following topic below.  I would prefer that you not use secondary sources unless there is a need to include biographical/historical information. Rely on your own reading of the stories and not on the reviews/critiques

A psychologist is conducting an experiment to investigate whether students’ eating and drinking habits on the day of their psychology exam lead to a

A psychologist is conducting an experiment to investigate whether students’ eating and drinking habits on the day of their psychology exam lead to a better performance on the exam (i.e. a higher grade earned). He recruits 300 students from Psych 100B and randomly assigns them to one of three conditions: eating no breakfast on the day of

Part a:  Choose 2 terms from the following list and identify and explain the significance of each. Each answer should be roughly 250 words in length EACH 

Part a:  Choose 2 terms from the following list and identify and explain the significance of each. Each answer should be roughly 250 words in length EACH  social scientific method  critical thinking  social structure  social determinants of health  Intersectionality  social constructionism   Hegemony  social systems paradigm Part b:  From the following